Turn the images you took with your digital camera into instax prints on the spot!
With FUJIFILM digital cameras, you can make instax prints by sending the images directly from your camera to “instax SHARE”.
You can now share the images that you can only achieve with digital cameras, such as children and pet images captured at fast shutter speed, or food and flower images with blurred backgrounds, by making them into instax prints on the spot.
< Compatible models >
X-E3 X-T2 / X-T20 / GFX50 / X-Pro2/X-T1/X100F
High-speed printing in 13 seconds
A new laser exposure system achieves a faster printing time of 13 seconds from print data transfer to print output.
At the same time, printing noise is lower which makes your printing experience much more enjoyable.
Superb image quality
High definition & high image quality ideal for photos
High resolution with print pixels of 800 x 800 dots and of 318 dpi clearly shows detailed gradations and the face expressions of a full-length portrait, characters, materials, etc.
Recording method 3-color exposure with OLED
Film FUJIFILM Instant Film "instax SQUARE"
Photo capacity 10 prints / pack
Image size 62mm x 62mm
Supported image size 800 x 800 dots
Printing resolution 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels 256 levels per color (RGB)
Interface Standard compliance IEEE802.11b/g/n, Operation frequency: 2412 MHz to 2462 MHz (11 ch)
Supported image formatJPEG, PNG
Printing time Image recording - photo output (Feed out) Approx. 13 sec.
Approximate pringting capacity Approx. 160 prints (Based on our test conditions)*Varies depending on the conditions of use.
Power supply NP-50
Charging time Approx. 3 hours (Varies depending on battery remaining level)
Power consumption 3 W
Operating temperature +5°C to + 40°C / +41°F to + 104°F(no condensation)
Dimensions 116 mm x 130.5 mm × 44.4 mm (excluding projections)
Weight 312g (without battery and film pack)
Supplied accessory Micro USB cable, Ferrite core